diff --git a/.config/blacklayer/call-blacklayer.sh b/.config/blacklayer/call-blacklayer.sh
new file mode 100644
index 0000000..38fc11f
--- /dev/null
+++ b/.config/blacklayer/call-blacklayer.sh
@@ -0,0 +1,104 @@
+#!/usr/bin/env bash
+
+# -------------------------
+# Base paths (EN BAŞTA)
+# -------------------------
+BASE_DIR="$HOME/.config/blacklayer"
+CONF_FILE="$BASE_DIR/blacklayer.conf"
+[ -f "$CONF_FILE" ] && source "$CONF_FILE"
+PID_FILE="$BASE_DIR/blacklayer_worker.pid"
+STATE_DIR="$BASE_DIR/blacklayer_state"
+COUNT_FILE="$BASE_DIR/blacklayer_count"
+
+WORKER="$BASE_DIR/blacklayer-worker.sh"
+BLACKLAYER_BIN="$BASE_DIR/blacklayer"
+
+
+NEED_HYPRIDLE=false
+
+if [ "$run_lock" = "true" ] || [ "$run_sleep" = "true" ]; then
+    NEED_HYPRIDLE=true
+else
+    notify-send "Hypridle" "hypridle is disabled via config"
+    echo "[hypridle] disabled via config"
+fi
+
+HYPRIDLE_RUNNING=false
+if systemctl --user --quiet is-active hypridle.service; then
+    HYPRIDLE_RUNNING=true
+fi
+
+case "$NEED_HYPRIDLE:$HYPRIDLE_RUNNING" in
+    true:false)
+        # Gerekli ama çalışmıyor → BAŞLAT
+        notify-send "Hypridle" "hypridle is enabled"
+        systemctl --user start hypridle.service
+        ;;
+
+    true:true)
+        # Gerekli fakat çalışıyor → KAPAT
+        notify-send "Hypridle" "hypridle is disabled"
+        systemctl --user stop hypridle.service
+        ;;
+
+    false:true)
+        # Gerekli değil fakat çalışıyor → KAPAT
+        #If you try to start hypridle.service and its closed by own this >
+        notify-send "Hypridle" "hypridle is disabled"
+        systemctl --user stop hypridle.service
+        ;;
+
+
+    *)
+        ;;
+esac
+
+# eğer blacklayer kapalıysa çık
+if [ "$run_blacklayer" != "true" ]; then
+    notify-send "Blacklayer" "blacklayer is disabled via config"
+    echo "[blacklayer] disabled via config"
+    kill "$(cat "$PID_FILE")" 2>/dev/null
+    rm -f "$PID_FILE"
+
+    # Tüm blacklayer processlerini kapat
+    pkill -f "$BLACKLAYER_BIN" 2>/dev/null
+
+    # State & count temizliği
+    rm -rf "$STATE_DIR"
+    rm -f "$COUNT_FILE"
+    exit 0
+fi
+
+
+# Dizini garanti altına al
+mkdir -p "$STATE_DIR"
+
+# -------------------------
+# Worker çalışıyorsa → KAPAT
+# -------------------------
+if [ -f "$PID_FILE" ] && kill -0 "$(cat "$PID_FILE")" 2>/dev/null; then
+    notify-send "Blacklayer" "blacklayer is stopping"
+    echo "[blacklayer] stopping..."
+
+    # Worker'ı kapat
+    kill "$(cat "$PID_FILE")" 2>/dev/null
+    rm -f "$PID_FILE"
+
+    # Tüm blacklayer processlerini kapat
+    pkill -f "$BLACKLAYER_BIN" 2>/dev/null
+
+    # State & count temizliği
+    rm -rf "$STATE_DIR"
+    rm -f "$COUNT_FILE"
+
+    exit 0
+fi
+
+# -------------------------
+# Çalışmıyorsa → BAŞLAT
+# -------------------------
+notify-send "Blacklayer" "blacklayer is starting"
+echo "[blacklayer] starting..."
+
+nohup bash "$WORKER" >/dev/null 2>&1 &
+echo $! > "$PID_FILE"
diff --git a/.config/blacklayer/event-driven.sh b/.config/blacklayer/event-driven.sh
new file mode 100644
index 0000000..0490ee0
--- /dev/null
+++ b/.config/blacklayer/event-driven.sh
@@ -0,0 +1,35 @@
+#!/usr/bin/env bash
+# Kullanım: event-driven.sh <MONITOR_NAME> <POLL_INTERVAL>
+MONITOR="$1"
+POLL_INTERVAL="${2:-3}"  # default 3s
+[ -z "$MONITOR" ] && { echo "Monitor arg missing"; exit 1; }
+
+BASE_DIR="$HOME/.config/blacklayer"
+BLACKLAYER_BIN="$BASE_DIR/blacklayer"
+STATE_DIR="$BASE_DIR/.blacklayer_state"
+STATE_FILE="$STATE_DIR/$MONITOR"
+
+WAYBAR_BIN="/usr/bin/waybar"
+WAYBAR_CONFIG_DIR="$HOME/.config/waybar"
+WAYBAR_CONFIG="$WAYBAR_CONFIG_DIR/config-$MONITOR"
+
+while true; do
+    sleep "$POLL_INTERVAL"
+
+    JSON="$(hyprctl -j monitors 2>/dev/null)"
+    echo "$JSON" | jq empty >/dev/null 2>&1 || continue
+
+    FOCUSED=$(echo "$JSON" | jq -r ".[] | select(.name==\"$MONITOR\") | .focused")
+    if [ "$FOCUSED" = "true" ]; then
+        # Blacklayer kapat
+        pkill -f "$BLACKLAYER_BIN $MONITOR" >/dev/null 2>&1
+        echo "false" > "$STATE_FILE"
+
+        # Waybar tekrar aç
+        if [ -f "$WAYBAR_CONFIG" ]; then
+            "$WAYBAR_BIN" -c "$WAYBAR_CONFIG" >/dev/null 2>&1 &
+        fi
+
+        exit 0
+    fi
+done
diff --git a/.config/blacklayer/generate-waybar-configs.sh b/.config/blacklayer/generate-waybar-configs.sh
new file mode 100644
index 0000000..1aa5d55
--- /dev/null
+++ b/.config/blacklayer/generate-waybar-configs.sh
@@ -0,0 +1,69 @@
+#!/usr/bin/env bash
+set -e
+
+WAYBAR_DIR="$HOME/.config/waybar"
+BASE_CONFIG="$WAYBAR_DIR/config"
+
+command -v hyprctl >/dev/null || { echo "[error] hyprctl not found"; exit 1; }
+command -v jq >/dev/null || { echo "[error] jq not found"; exit 1; }
+
+cd "$WAYBAR_DIR"
+
+# -----------------------------
+# 1) MONITORLER
+# -----------------------------
+MONITORS=$(hyprctl -j monitors | jq -r '.[].name')
+
+[ -z "$MONITORS" ] && {
+    echo "[info] no monitors found, skipping"
+    exit 0
+}
+
+# -----------------------------
+# 2) BASE CONFIG BELLEĞE AL
+#    (output temizlenmiş halde)
+# -----------------------------
+BASE_CONTENT=""
+
+strip_output() {
+    sed \
+        -e 's/"output"[[:space:]]*:[[:space:]]*\[[^]]*\],[[:space:]]*//' \
+        -e '1s/^{//' \
+        "$1"
+}
+
+if [ -f "$BASE_CONFIG" ]; then
+    echo "[info] base config: config"
+    BASE_CONTENT="$(strip_output "$BASE_CONFIG")"
+else
+    FIRST_MONITOR_CONFIG=$(ls config-* 2>/dev/null | head -n 1 || true)
+
+    [ -z "$FIRST_MONITOR_CONFIG" ] && {
+        echo "[error] no base config found"
+        exit 1
+    }
+
+    echo "[info] base config: $FIRST_MONITOR_CONFIG"
+    BASE_CONTENT="$(strip_output "$FIRST_MONITOR_CONFIG")"
+fi
+
+# -----------------------------
+# 3) TEMİZLİK (MONITOR VARSA)
+# -----------------------------
+rm -f config
+rm -f config-*
+
+# -----------------------------
+# 4) YENİ CONFIGLER
+# -----------------------------
+for MONITOR in $MONITORS; do
+    TARGET="config-$MONITOR"
+
+    {
+        echo '{'
+        echo "  \"output\": [\"$MONITOR\"],"
+        echo "$BASE_CONTENT"
+    } > "$TARGET"
+
+    echo "[ok] generated $TARGET"
+done
diff --git a/.config/blacklayer/idle-lock.sh b/.config/blacklayer/idle-lock.sh
new file mode 100644
index 0000000..80e6ee4
--- /dev/null
+++ b/.config/blacklayer/idle-lock.sh
@@ -0,0 +1,12 @@
+#!/bin/bash
+
+CONF="$HOME/.config/blacklayer/blacklayer.conf"
+[ -f "$CONF" ] && source "$CONF"
+
+# hypridle çağırdı ama lock kapalıysa → çık
+[ "$run_lock" != "true" ] && exit 0
+
+# zaten kilitliyse tekrar kilitleme
+pgrep -x hyprlock >/dev/null && exit 0
+
+hyprlock
diff --git a/.config/blacklayer/idle-resume.sh b/.config/blacklayer/idle-resume.sh
new file mode 100644
index 0000000..1505c2f
--- /dev/null
+++ b/.config/blacklayer/idle-resume.sh
@@ -0,0 +1,3 @@
+#!/bin/bash
+hyprctl dispatch dpms on
+hyprctl reload
diff --git a/.config/blacklayer/idle-sleep.sh b/.config/blacklayer/idle-sleep.sh
new file mode 100644
index 0000000..8e10e82
--- /dev/null
+++ b/.config/blacklayer/idle-sleep.sh
@@ -0,0 +1,9 @@
+#!/bin/bash
+
+CONF="$HOME/.config/blacklayer/blacklayer.conf"
+[ -f "$CONF" ] && source "$CONF"
+
+# sleep kapalıysa → çık
+[ "$run_sleep" != "true" ] && exit 0
+
+hyprctl dispatch dpms off