From cd78d2b54f1edf56c06ae59b4a395f909abf1685 Mon Sep 17 00:00:00 2001
From: FURK4NGG <105324908+FURK4NGG@users.noreply.github.com>
Date: Thu, 18 Jun 2026 19:49:13 +0300
Subject: [PATCH] Update README.md

---
 README.md | 68 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 file changed, 67 insertions(+), 1 deletion(-)

diff --git a/README.md b/README.md
index bb88abd..e34ea60 100644
--- a/README.md
+++ b/README.md
@@ -1 +1,67 @@
-# Fotokapan
\ No newline at end of file
+## 👀 Fotokapan Overview  
+<h1 align="center">A handmade camera trap</h1>  
+
+![Fotokapan Demo Image]()
+
+## 🚀 Features  
+<h1 align="center">This is a portable mini camera trap. It detects motion with a PIR sensor, uses flash when needed, and saves every photo to an SD card with a unique name.</h1>  
+
+
+## 🔎 Preparation
+<details>
+<summary>1. Components</summary>
+'1' ESP32-CAM<br>
+'3' AA Batteries (1.5V each)<br>
+'1' MT3608 adjustable DC/DC voltage regulator (4.5V to 5.01V step-up)<br>
+'1' FT232RL USB to UART Converter<br>
+</details>
+
+2. `Use an SD card with a minimum capacity of 4 GB, formatted as FAT32 with a 32 KB allocation unit size.`
+3. `Then insert this SD card into your ESP32-CAM board.`
+4. `Connect your 'OV2640' camera to your ESP32-CAM board.`
+
+
+## 📦 Setup 
+1. `Refer to the 'fotokapan-programming.png' diagram`
+2. `Install the 'Arduino IDE' software and open 'fotokapan.ino' file`
+3. `File>Preferences>Additional Boards Manager URLs:(Click the double window button)`
+>Paste this code  
+```bash
+https://dl.espressif.com/dl/package_esp32_index.json
+```
+4. `Click 'OK'`  
+5. `Tools>Board>Boards Manager...`  
+6. `Search 'esp32' by Espressif Systems, and install it` 
+> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.
+7. `Plug the ESP32CAM into your computer`
+8. `Tools>Board>esp32>'AI Thinker ESP32-CAM'`
+9. `Tools>Port>'Select the esp's port'`
+
+<details>
+<summary>Apply these changes:</summary>
+
+- CPU Frequency: 240MHz (WiFi/BT)
+- Core Debug Level: None
+- Erase All Flash Before Sketch Upload: Disabled
+- Flash Frequency: 80MHz
+- Flash Mode: QIO
+- Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)
+- *115200 baud*
+
+</details>
+
+10. `Tools>Manage Libraries...>Install the libraries used in the code`
+11. `Click the 'upload ➡️' button`  
+✅ **To make sure it has been uploaded successfully, you should see the message 'Done uploading'** 
+> ⚠️ **Advisory for Developers:** If you want to try this project in the future with new generation boards and you want to add new features like using 'DS1302 real time module', you must have 3 unused pins.
+
+## 🎉 Run  
+1. `Refer to the 'circuit_fotokapan.png' diagram`  
+2. `Let the electricity pass through the switch`  
+3. `Press the reset button on the esp32cam`  
+4. `You are ready to use your mini camera`  
+> ⚠️ `After turning on the camera, wait 5 seconds before using it. Turn off the power before removing the SD card. When taking photos, leave at least a 2–3 second interval between shots. Do not cover the front of the flash to prevent a potential fire hazard.` 
+
+
+## 🔒 License  
+<h1 align="center">📜 GPL-3.0 License</h1>