From cf3826f0c6a8c5a8fda5bf9404a39dcb987049f1 Mon Sep 17 00:00:00 2001
From: FURK4NGG <105324908+FURK4NGG@users.noreply.github.com>
Date: Wed, 5 Nov 2025 02:12:49 +0300
Subject: [PATCH] Revise README for Arduino Uno Home Assistant

Updated project overview and features for Arduino Uno Home Assistant.
---
 README.md | 45 ++++++++++++++-------------------------------
 1 file changed, 14 insertions(+), 31 deletions(-)

diff --git a/README.md b/README.md
index 23bbe6b..be52a35 100644
--- a/README.md
+++ b/README.md
@@ -1,9 +1,9 @@
-## 👀 arduino-uno_home-assistant Overview  
-<h1 align="center">A handmade photo camera</h1>  
+## 👀 arduino-uno_home-assistant 1st Generation Overview  
+<h1 align="center">Home Assistant powered by Arduino Uno</h1>  
 
 
 ## 🚀 Features  
-<h1 align="center">This a portable mini photo camera.It has also a flash.Every photo saved with unique name in a sd card storage.</h1>  
+<h1 align="center">When a flammable gas or high humidity and flame is detected, the system identifies a potential fire and triggers an audible alarm using a buzzer. During normal operation, the LCD screen allows you to monitor real-time humidity and time — creating a compact smart home safety project.</h1>  
 
 
 ## 🔎 Preparation
@@ -18,39 +18,22 @@
 '1' 5V Active Buzzer
 </details>
 
-2. `Use an SD card with a minimum capacity of 4 GB, formatted as FAT32 with a 32 KB allocation unit size.`
-3. `Then insert this SD card into your ESP32-CAM board.`
-4. `Connect your 'OV2640' camera to your ESP32-CAM board.`
-
 
 ## 📦 Setup 
-1. `Refer to the 'circuit_camera-programming.png' diagram`
-2. `Install the 'Arduino IDE' software and open 'esp32-cam_camera.ino' with 5 other file`
-3. `File>Preferences>Additional Boards Manager URLs:(Click the double window button)`
->Paste this code  
-```bash
-https://dl.espressif.com/dl/package_esp32_index.json
-```
-4. `Click 'OK'`  
-5. `Tools>Board>Boards Manager...`  
-6. `Search 'esp32' by Espressif Systems, and install it` 
-> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.
-7. `Plug the ESP32CAM into your computer`
-8. `Tools>Board>esp32>'AI Thinker ESP32-CAM'`
-9. `Tools>Port>'Select the esp's port'`
-
-
-
-10. `Tools>Manage Libraries...>Install the libraries used in the code`
-11. `Click the 'upload ➡️' button`  
+1. `Refer to the 'circuit_uno_home-assistant.png' diagram`
+2. `Install the 'Arduino IDE' software and open 'arduino-uno_home-assistant.ino' file`
+> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341) before connecting the ESP32CAM to your computer.
+3. `Plug the Arduino Uno into your computer`
+4. `Tools>Board>'Arduino Uno'`
+5. `Tools>Port>'Select the arduino's port'`
+6. `Tools>Manage Libraries...>Install the libraries used in the code`
+7. `Click the 'upload ➡️' button`  
 ✅ **To make sure it has been uploaded successfully, you should see the message 'Done uploading'** 
-> ⚠️ **Advisory for Developers:** If you want to try this project in the future with new generation boards and you want to add new features like using 'DS1302 real time module', you must have 3 unused pins.
+
 
 ## 🎉 Run  
-1. `Refer to the 'circuit_camera.png' diagram`  
-2. `Let the electricity pass through the switch`  
-3. `Press the reset button on the esp32cam`  
-4. `You are ready to use your mini camera`  
+1. `Press the reset button on the arduino`  
+2. `You are ready to use your Home Assistant`  
 
 
 ## 🔒 License