A handmade photo camera

<!-- Proje-Resmi -->

## 👀 esp32-cam_camera Overview  
<h1 align="center">A handmade photo camera</h1>  


## 🚀 Features  
<h1 align="center">This a portable mini photo camera.It has also a flash.Every photo saved with unique name in a sd card storage.</h1>  


## 🔎 Preparation
1. `Use an SD card with a minimum capacity of 4 GB, formatted as FAT32 with a 32 KB allocation unit size.`
2. `Then insert this SD card into your ESP32-CAM board.`
2. `Connect your OV2640 camera to your ESP32-CAM board.`


## 📦 Setup 
1. `Refer to the circuit diagram`
2. `Install the 'Arduino IDE' software and open 'esp32-cam_camera.ino' file`
3. `File>Preferences>Additional Boards Manager URLs:(Click the double window button)`
>Paste this code  
```bash
https://dl.espressif.com/dl/package_esp32_index.json
```
4. `Click 'OK'`  
5. `Tools>Board>Boards Manager...`  
6. `Search 'esp32' by Espressif Systems, and install it` 
> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.
7. `Plug the ESP32CAM into your computer`
8. `Tools>Board>esp32>'AI Thinker ESP32-CAM'`
9. `Tools>Port>'Select the esp's port'`

<details>
<summary>Apply these changes:</summary>

- CPU Frequency: 240MHz (WiFi/BT)
- Core Debug Level: None
- Erase All Flash Before Sketch Upload: Disabled
- Flash Frequency: 80MHz
- Flash Mode: QIO
- Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)

</details>

10. `Tools>Manage Libraries...>Install the libraries used in the code`
11. `Click the 'upload ➡️' button`  
✅ **To make sure it has been uploaded successfully, you should see the message 'Done uploading'** 


## 🎉 Run  
1. `Connect the battery to the board`  
2. `Disconnect the IO0-GND connection(disable programming mode)`  
3. `Press the reset button on the esp32cam`  
4. `You are ready to use your mini camera`  


## 🔒 License  
<h1 align="center">📜 GPL-3.0 License</h1>