diff --git a/README.md b/README.md
index 0f20e79..5f090c0 100644
--- a/README.md
+++ b/README.md
@@ -1 +1,53 @@
-# esp32-cam_webserver
\ No newline at end of file
+<!-- Proje-Resmi -->
+<!-- buton ve batarya eklenmis devre semasi -->
+
+## 👀 esp32-cam_webserver Overview  
+<h1 align="center">A handmade webcam</h1>  
+
+
+## 🚀 Features  
+<h1 align="center">This a portable mini photo camera.It has also a flash.Every photo saved with unique name in a sd card storage.</h1>  
+
+
+## 📦 Setup 
+1. `Refer to the circuit diagram`
+2. `File>Preferences>Additional Boards Manager URLs:(Click the double window button)`
+>Paste this code  
+```bash
+https://dl.espressif.com/dl/package_esp32_index.json
+```
+3. `Click 'OK'`
+4. `Install the 'Arduino IDE' software and open 'Examples>esp32>Camera>CameraWebServer' file`
+5. `Tools>Board>Boards Manager...`  
+6. `Search 'esp32' by Espressif Systems, and install it` 
+> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.
+7. `Plug the ESP32CAM into your computer`
+8. `Tools>Board>esp32>'AI Thinker ESP32-CAM'`
+9. `Tools>Port>'Select the esp's port'`
+
+<details>
+<summary>Apply these changes:</summary>
+
+- CPU Frequency: 240MHz (WiFi/BT)
+- Core Debug Level: None
+- Erase All Flash Before Sketch Upload: Disabled
+- Flash Frequency: 80MHz
+- Flash Mode: QIO
+- Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)
+
+</details>
+
+10. `Tools>Manage Libraries...>Install the libraries used in the code`
+11. `Click the 'upload ➡️' button`  
+✅ **To make sure it has been uploaded successfully, you should see the message 'Done uploading'** 
+
+
+## 🎉 Run  
+1. `Connect the battery to the board`  
+2. `Disconnect the IO0-GND connection(disable programming mode)`  
+3. `Press the reset button on the esp32cam`  
+4. `You are ready to use your mini camera`  
+
+
+## 🔒 License  
+<h1 align="center">📜 GPL-3.0 License</h1>