## 👀 esp32-cam_webserver Overview
A handmade webcam
## 🚀 Features
This a portable mini photo camera.It has also a flash.Every photo saved with unique name in a sd card storage.
## 📦 Setup
1. `Refer to the circuit diagram`
2. `File>Preferences>Additional Boards Manager URLs:(Click the double window button)`
>Paste this code
```bash
https://dl.espressif.com/dl/package_esp32_index.json
```
3. `Click 'OK'`
4. `Install the 'Arduino IDE' software and open 'Examples>esp32>Camera>CameraWebServer' file`
5. `Tools>Board>Boards Manager...`
6. `Search 'esp32' by Espressif Systems, and install it`
> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.
7. `Plug the ESP32CAM into your computer`
8. `Tools>Board>esp32>'AI Thinker ESP32-CAM'`
9. `Tools>Port>'Select the esp's port'`
Apply these changes:
- CPU Frequency: 240MHz (WiFi/BT)
- Core Debug Level: None
- Erase All Flash Before Sketch Upload: Disabled
- Flash Frequency: 80MHz
- Flash Mode: QIO
- Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)
10. `Tools>Manage Libraries...>Install the libraries used in the code`
11. `Click the 'upload ➡️' button`
✅ **To make sure it has been uploaded successfully, you should see the message 'Done uploading'**
## 🎉 Run
1. `Connect the battery to the board`
2. `Disconnect the IO0-GND connection(disable programming mode)`
3. `Press the reset button on the esp32cam`
4. `You are ready to use your mini camera`
## 🔒 License
📜 GPL-3.0 License