FURK4NGG
78 lines
3.1 KiB
Markdown
78 lines
3.1 KiB
Markdown
<!-- kameraya filtre uygulama -->
|
||
|
||
## 👀 esp32-cam_camera Overview
|
||
a
|
||
<h1 align="center">A handmade photo camera</h1>
|
||
|
||
|
||
|
||
|
||
|
||
|
||
|
||
## 🚀 Features
|
||
<h1 align="center">This a portable mini photo camera.It has also a flash.Every photo saved with unique name in a sd card storage.</h1>
|
||
|
||
|
||
## 🔎 Preparation
|
||
<details>
|
||
<summary>1. Components</summary>
|
||
'1' ESP32-CAM<br>
|
||
'1' 3.7V Li-Po Battery<br>
|
||
'1' MT3608 adjustable DC/DC voltage regulator (3.7V to 5.01 V step-up)<br>
|
||
'1' TP4056 charging circuit (with reverse-current protection)<br>
|
||
'1' Rocker Switch<br>
|
||
'1' Micro Switch<br>
|
||
'1' FT232RL USB to UART Converter<br>
|
||
</details>
|
||
|
||
2. `Use an SD card with a minimum capacity of 4 GB, formatted as FAT32 with a 32 KB allocation unit size.`
|
||
3. `Then insert this SD card into your ESP32-CAM board.`
|
||
4. `Connect your 'OV2640' camera to your ESP32-CAM board.`
|
||
|
||
|
||
## 📦 Setup
|
||
1. `Refer to the 'circuit_camera-programming.png' diagram`
|
||
2. `Install the 'Arduino IDE' software and open 'esp32-cam_camera.ino' with 5 other file`
|
||
3. `File>Preferences>Additional Boards Manager URLs:(Click the double window button)`
|
||
>Paste this code
|
||
```bash
|
||
https://dl.espressif.com/dl/package_esp32_index.json
|
||
```
|
||
4. `Click 'OK'`
|
||
5. `Tools>Board>Boards Manager...`
|
||
6. `Search 'esp32' by Espressif Systems, and install it`
|
||
> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.
|
||
7. `Plug the ESP32CAM into your computer`
|
||
8. `Tools>Board>esp32>'AI Thinker ESP32-CAM'`
|
||
9. `Tools>Port>'Select the esp's port'`
|
||
|
||
<details>
|
||
<summary>Apply these changes:</summary>
|
||
|
||
- CPU Frequency: 240MHz (WiFi/BT)
|
||
- Core Debug Level: None
|
||
- Erase All Flash Before Sketch Upload: Disabled
|
||
- Flash Frequency: 80MHz
|
||
- Flash Mode: QIO
|
||
- Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)
|
||
- *115200 baud*
|
||
|
||
</details>
|
||
|
||
10. `Tools>Manage Libraries...>Install the libraries used in the code`
|
||
11. `Click the 'upload ➡️' button`
|
||
✅ **To make sure it has been uploaded successfully, you should see the message 'Done uploading'**
|
||
> ⚠️ **Advisory for Developers:** If you want to try this project in the future with new generation boards and you want to add new features like using 'DS1302 real time module', you must have 3 unused pins.
|
||
|
||
## 🎉 Run
|
||
1. `Refer to the 'circuit_camera.png' diagram`
|
||
2. `Let the electricity pass through the switch`
|
||
3. `Press the reset button on the esp32cam`
|
||
4. `You are ready to use your mini camera`
|
||
> ⚠️ `After turning on the camera, wait 5 seconds before using it. Turn off the power before removing the SD card. When taking photos, leave at least a 2–3 second interval between shots. Do not cover the front of the flash to prevent a potential fire hazard.`
|
||
|
||
|
||
## 🔒 License
|
||
<h1 align="center">📜 GPL-3.0 License</h1>
|