79 lines
3.0 KiB
Markdown
79 lines
3.0 KiB
Markdown
## 👀 esp32-cam_webserver Overview
|
|
<h1 align="center">A handmade webcam</h1>
|
|
|
|
|
|
|
|
|
|
|
|
## 🚀 Features
|
|
<h1 align="center">This a portable webcam (1600x1200).It has also a flash.If you want, you can record stream in the OBS application, or create a virtual camera in OBS and use it with applications like Zoom or Teams.</h1>
|
|
|
|
|
|
## 🔎 Preparation
|
|
<details>
|
|
<summary>1. Components</summary>
|
|
'1' ESP32-CAM<br>
|
|
'1' FT232RL USB to UART Converter<br>
|
|
</details>
|
|
|
|
|
|
## 📦 Setup
|
|
1. `Refer to the circuit diagram`
|
|
2. `File>Preferences>Additional Boards Manager URLs:(Click the double window button)`
|
|
>Paste this code
|
|
```bash
|
|
https://dl.espressif.com/dl/package_esp32_index.json
|
|
```
|
|
3. `Click 'OK'`
|
|
4. `Install the 'Arduino IDE' software and open 'Examples>ESP32>Camera>CameraWebServer' file`
|
|
5. `Open the 'board_config.h' and add '//' at the beginning to turn your default camera module line for change into a comment line then, remove the '//' in front of #define CAMERA_MODEL_AI_THINKER.`
|
|
6. `Tools>Board>Boards Manager...`
|
|
7. `Search 'esp32' by Espressif Systems, and install it`
|
|
> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.
|
|
7. `Plug the ESP32CAM into your computer`
|
|
8. `Tools>Board>esp32>'AI Thinker ESP32-CAM'`
|
|
9. `Tools>Port>'Select the esp's port'`
|
|
|
|
<details>
|
|
<summary>Apply these changes:</summary>
|
|
|
|
- CPU Frequency: 240MHz (WiFi/BT)
|
|
- Core Debug Level: None
|
|
- Erase All Flash Before Sketch Upload: Disabled
|
|
- Flash Frequency: 80MHz
|
|
- Flash Mode: QIO
|
|
- Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)
|
|
- *115200 baud*
|
|
|
|
</details>
|
|
|
|
10. `Tools>Manage Libraries...>Install the libraries used in the code`
|
|
11. `Click the 'upload ➡️' button`
|
|
✅ **To make sure it has been uploaded successfully, you should see the message 'Done uploading'**
|
|
|
|
|
|
## 🎉 Run
|
|
1. `Disconnect the IO0-GND connection(disable programming mode)`
|
|
2. `Connect your esp32cam to your pc`
|
|
3. `Press the reset button on the esp32cam`
|
|
<details>
|
|
<summary>Open 'OBS' app and follow these steps:</summary>
|
|
|
|
1. Sources(Kaynaklar)>Click +>Media Source(Ortam kaynağı)>Click OK>Deselect the 'Local File'
|
|
- Network Buffering: 16MB(max)
|
|
- Input: esp32cam's last stream ip + (gate 81) + '/stream' --> "http://192.168.1.63:81/stream"
|
|
- Reconnect Delay: 5S
|
|
- !Keep the other settings as default!
|
|
|
|
|
|
</details>
|
|
|
|
5. `You are ready to use your mini webcam`
|
|
6. `You can access the camera settings from esp32cam's ip --> "http://192.168.1.63"`
|
|
|
|
> ✨ **Tip:** If you want to avoid being tied to a cable, you can use portable power sources such as a power bank that provides a 5V 1A output, allowing you to use your device freely wherever you like.
|
|
|
|
|
|
## 🔒 License
|
|
<h1 align="center">📜 GPL-3.0 License</h1>
|