👀 esp32-cam_webserver Overview

A handmade webcam

🚀 Features

This a portable mini photo camera.It has also a flash.Every photo saved with unique name in a sd card storage.

📦 Setup

1. Refer to the circuit diagram
2. File>Preferences>Additional Boards Manager URLs:(Click the double window button)

Paste this code

https://dl.espressif.com/dl/package_esp32_index.json

3. Click 'OK'
4. Install the 'Arduino IDE' software and open 'Examples>esp32>Camera>CameraWebServer' file
5. Tools>Board>Boards Manager...
6. Search 'esp32' by Espressif Systems, and install it

⚠️ Warning: Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.

7. Plug the ESP32CAM into your computer
8. Tools>Board>esp32>'AI Thinker ESP32-CAM'
9. Tools>Port>'Select the esp's port'

Apply these changes:

• CPU Frequency: 240MHz (WiFi/BT)
• Core Debug Level: None
• Erase All Flash Before Sketch Upload: Disabled
• Flash Frequency: 80MHz
• Flash Mode: QIO
• Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)

10. Tools>Manage Libraries...>Install the libraries used in the code
11. Click the 'upload ➡️' button
    ✅ To make sure it has been uploaded successfully, you should see the message 'Done uploading'

🎉 Run

1. Disconnect the IO0-GND connection(disable programming mode)
2. Connect your esp32cam to your pc
3. Press the reset button on the esp32cam

Open 'OBS' app and follow these steps:

1. Sources(Kaynaklar)>Click +>Media Source(Ortam kaynağı)>Click OK>Deselect the 'Local File'

• Network Buffering: 16MB(max)
• Input: esp32cam's last stream ip + (gate 81) + '/stream' --> "http://192.168.1.63:81/stream"
• Reconnect Delay: 5S
• !Keep the other settings as default!

5. `` 6. `You are ready to use your mini camera`

🔒 License

📜 GPL-3.0 License