FURK4NGG
54 lines
1.8 KiB
Markdown
54 lines
1.8 KiB
Markdown
<!-- Proje-Resmi -->
|
|
<!-- buton ve batarya eklenmis devre semasi -->
|
|
|
|
## 👀 esp32-cam_webserver Overview
|
|
<h1 align="center">A handmade webcam</h1>
|
|
|
|
|
|
## 🚀 Features
|
|
<h1 align="center">This a portable mini photo camera.It has also a flash.Every photo saved with unique name in a sd card storage.</h1>
|
|
|
|
|
|
## 📦 Setup
|
|
1. `Refer to the circuit diagram`
|
|
2. `File>Preferences>Additional Boards Manager URLs:(Click the double window button)`
|
|
>Paste this code
|
|
```bash
|
|
https://dl.espressif.com/dl/package_esp32_index.json
|
|
```
|
|
3. `Click 'OK'`
|
|
4. `Install the 'Arduino IDE' software and open 'Examples>esp32>Camera>CameraWebServer' file`
|
|
5. `Tools>Board>Boards Manager...`
|
|
6. `Search 'esp32' by Espressif Systems, and install it`
|
|
> ⚠️ **Warning:** Make sure you have installed the correct USB driver (CH340, CH341, FT232R / FTDI Driver, CP2102) before connecting the ESP32CAM to your computer.
|
|
7. `Plug the ESP32CAM into your computer`
|
|
8. `Tools>Board>esp32>'AI Thinker ESP32-CAM'`
|
|
9. `Tools>Port>'Select the esp's port'`
|
|
|
|
<details>
|
|
<summary>Apply these changes:</summary>
|
|
|
|
- CPU Frequency: 240MHz (WiFi/BT)
|
|
- Core Debug Level: None
|
|
- Erase All Flash Before Sketch Upload: Disabled
|
|
- Flash Frequency: 80MHz
|
|
- Flash Mode: QIO
|
|
- Partition Scheme: Huge APP (3MB No OTA/1MB SPIFFS)
|
|
|
|
</details>
|
|
|
|
10. `Tools>Manage Libraries...>Install the libraries used in the code`
|
|
11. `Click the 'upload ➡️' button`
|
|
✅ **To make sure it has been uploaded successfully, you should see the message 'Done uploading'**
|
|
|
|
|
|
## 🎉 Run
|
|
1. `Connect the battery to the board`
|
|
2. `Disconnect the IO0-GND connection(disable programming mode)`
|
|
3. `Press the reset button on the esp32cam`
|
|
4. `You are ready to use your mini camera`
|
|
|
|
|
|
## 🔒 License
|
|
<h1 align="center">📜 GPL-3.0 License</h1>
|